Votre commande peut prendre jusqu'à 24-48 heures pour traitement. Une fois complété, le délai de livraison varie de 1-5 jours ouvrables selon l'addresse de livraison.

LIVRAISON GRATUITEpour toutes les commandes au-dessus de au Canada! Commandes inférieures à , le frais d'expédition est seulement ! *Livraison gratuite n'est pas disponible quand l’adresse d’expédition est un lieu éloigné.Plus >>

Votre commande peut prendre jusqu'à 24-48 heures pour traitement. Une fois complété, le délai de livraison varie de 1-5 jours ouvrables selon l'addresse de livraison.

LIVRAISON GRATUITEpour toutes les commandes au-dessus de au Canada! Commandes inférieures à , le frais d'expédition est seulement ! *Livraison gratuite n'est pas disponible quand l’adresse d’expédition est un lieu éloigné.Plus >>

Économisez jusqu'à 80%! Événement Client Mi-Année💥

MAGASINEZ

Surprise du week-end pour les membres PLUS

CODE: PLUSWKND

Référez un ami et obtenez 25$ de rabais

Partagez maintenant
Retour aux détails du produit >

Dual Motor Sit-Stand Desk Frame - Electric Adjustable - PrimeCables

Commentaires par61client
Trier par
Affichage de 1-6 sur 68 commentaires
Voir tous les commentaires des clients
  • 5 /5
    Remercié 1 fois pour 1 avis
    16 déc. 2023

    This desk frame is built sturdy and functions well. It came packed extremely well, compact and protected. The only tool needed was one allan wrench that was included. I had no problem assembling the unit by myself. Some rubber grommets had come out, I suspect because they weren't fully seated in the holes. After assembly, I tested for full travel then lifted my 96" X 30" table/desk on top without unloading it. It will stops when it hits something.

      Ce commentaire vous a-t-il été utile? Merci (1 personnes ont remercié guest customer pour cet avis)
    • 5 /5

      Par

      de

      Remercié 0 fois pour 2 avis
      29 août 2023

      Great value option when it's on sale. The dual motors are strong and I haven't encountered any issues moving the desk so far, aside from some motor noises when lowering the desk. It is a little bit wobbly if you intentionally shake it in the standing position, but that's expected for a product at this price point. Two other minor things to note are that you'll need a power drill to screw in the table top, and that there is no cover for the cables, only cable ties. Overall, this is a great product and I highly recommend.

        Ce commentaire vous a-t-il été utile? Merci (0 personnes ont remercié Andy L pour cet avis)
      • 4 /5

        Par

        de Quebec

        Remercié 54 fois pour 89 avis
        16 sept. 2023

        After purchasing a smaller model for my wife, I got thoroughly impressed by her desk's sturdiness and convenience. So I checked Shopperplus for a model that supports heavier loads (I use three monitors and studio speakers on a video editing setup), so I needed something that can lift comfortably 100kg. This kit checks all the boxes, it's the cheapest on Shopperplus for over 76kg load and it sports two motors. It is extremely silent! Where my wife's desk is silent, when it starts and stops there is a slight "thunk". This desk is totally silent, the tabletop just moves. Also the command box is a set of plastic buttons and NOT film-based buttons. Those mechanical plastic buttons will likely survive the film-based ones. Tighten screws really well. That ensures that legs and frame are very sturdy and do not wobble at all. Careful when installing the table top that screws provided do not pass through - use shorter screws if needed. Only thing of note is that this desk frame is HEAVY, assembly is possible by one person, but you will need a second person to flip the frame over the tabletop for screwing - and for lifting it back. Depending on the tabletop weight, you may want to pre-drill screw holes with the base on, flip both separately and then assemble the whole thing with the frame up (so you don't have to flip it with both pieces together). Trust me, it's that heavy and risks of damaging the tabletop (or yourself) is high. Nevertheless, this desk frame is highly recommended - as it works really well and offers tremendous value for the price. UPDATE: After a few days plugged in, the controls started to act a bit wonky: anytime I'd press UP, the desk would start, stop, then return to its starting position. Idem for DOWN, and same for whenever I wanted to recall a memorized position. I kinda started to think that the control box shorted or the motors were jammed. But I could still lift and lower the tabletop if I pressed in very short increments. So nothing jammed. Before starting RMA'ing anything, I tried to reset/calibrate the whole thing by pressing various buttons combinations. Happens that holding UP and DOWN for couple of seconds will display "A-0" on the display, and ta-dah! everything works as before! So before freaking out, try this one on your control panel.

          Ce commentaire vous a-t-il été utile? Merci (7 personnes ont remercié David S pour cet avis)
        • 4 /5

          Par

          de Quebec

          Remercié 54 fois pour 89 avis
          15 sept. 2023

          After purchasing a smaller model for my wife, I got thoroughly impressed by her desk's sturdiness and convenience. So I checked Shopperplus for a model that supports heavier loads (I use three monitors and studio speakers on a video editing setup), so I needed something that can lift comfortably 100kg. This kit checks all the boxes, it's the cheapest on Shopperplus for over 76kg load and it sports two motors. It is extremely silent! Where my wife's desk is silent, when it starts and stops there is a slight "thunk". This desk is totally silent, the tabletop just moves. Also the command box is a set of plastic buttons and NOT film-based buttons. Those mechanical plastic buttons will likely survive the film-based ones. Tighten screws really well. That ensures that legs and frame are very sturdy and do not wobble at all. Careful when installing the table top that screws provided do not pass through - use shorter screws if needed. Only thing of note is that this desk frame is HEAVY, assembly is possible by one person, but you will need a second person to flip the frame over the tabletop for screwing - and for lifting it back. Depending on the tabletop weight, you may want to pre-drill screw holes with the base on, flip both separately and then assemble the whole thing with the frame up (so you don't have to flip it with both pieces together). Trust me, it's that heavy and risks of damaging the tabletop (or yourself) is high. Nevertheless, this desk frame is highly recommended - as it works really well and offers tremendous value for the price.

            Ce commentaire vous a-t-il été utile? Merci (3 personnes ont remercié David S pour cet avis)
          • 4 /5

            Par

            de Ontario

            Remercié 4 fois pour 2 avis
            12 nov. 2023

            Great product for the price point. My computer monitors shake a tiny little bit when the desk is touched or leaned on but this is to be expected with a less expensive two legged standing desk. It doesn't bother me as I am working. Note that the difference of this desk and the more expensive option on the website is that the legs on this desk are two pieces instead of three. They therefore cannot go as low. Make sure the minimum height will work for you. If you are shorter, the desk might not go low enough.

              Ce commentaire vous a-t-il été utile? Merci (2 personnes ont remercié e****s pour cet avis)
            • 5 /5

              Par

              de Ontario

              Remercié 8 fois pour 43 avis
              04 mai 2024

              Solid and tick desk top. Comes in two pieces. This is designed to be used with a stand that supports the center. If you're attaching single legs, I recommend attaching some support bars along the center of the two pieces to support it.

                Ce commentaire vous a-t-il été utile? Merci (1 personnes ont remercié RayGobot pour cet avis)
              Affichage de 1-6 sur 68 commentaires
              Voir tous les commentaires des clients