Pretty good desk frame. Solid build quality. Gave it 4/5 because I needed a few back and forth with support which took weeks for an issue where the desk would stop rising/lowering and reverse a few inches. For anyone with this issue, you need to make sure the control box is solidly secured to the desk. In my case this was not enough and had to disable the collision detection by holding the up+down arrows for 5 seconds. You can adjust the sensitivity from 0-4 with 0 being disabled. I wish this was in the manual.

Item arrived in 2 days, ahead of schedule. The desk frame is excellent quality, stable, easily adjustable for width and well finished. Height movement is quiet and smooth. Assembly is simple and straight forward with good instructions. Control panel is easy to understand and simple to store height presets. All in all, it is a great product that delivers exactly what is advertised. The only thing I had to do that was not covered in the manual was to level (even) the legs as there was about a 1/4" difference in height. This was easily accomplished by disconnecting the rod on the non-motor end, and manually spinning the height mechanism on that side with a 6mm hex wrench, then reconnecting the rod. Very simple and yielded perfect results. Frame comes with tabletop mounting screws and also preinstalled rubber grommets, which are an excellent touch as they allow for seasonal wood movement if you are planning to finish with a solid wood top. I finished mine with a 2" live edge ash tabletop.

le mécanisme a arrêté de fonctionner après une semaine

Desk frame is sturdy, adjustable, and exactly what I needed! Pairing this with a table top is much cheaper than buying sit/stand desks from anywhere else. We have 7 of these in the family, and I would continue to recommend these to anyone looking at getting their own sit/stand desk.

I bought 20 of those. They all work.

took about 1.5 hours to assemble by myself (being very careful), instructions easy to follow, frame allows for a shorter desk length than other frames, 2 monitors/KB/mouse/laptop and so far no problems with motor./controller moving desk up and down, would like desktop to go a little lower however knew the lowest height when purchased so that is ok.