Livraison gratuite sur les commandes de 49 $ et plus

Votre commande peut prendre jusqu'à 24-48 heures pour traitement. Une fois complété, le délai de livraison varie de 1-5 jours ouvrables selon l'addresse de livraison.

LIVRAISON GRATUITEpour toutes les commandes au-dessus de 49 $ au Canada! Commandes inférieures à 49 $, le frais d'expédition est seulement 7,95 $! *Livraison gratuite n'est pas disponible quand l’adresse d’expédition est un lieu éloigné.Plus >>

Livraison gratuite sur les commandes de 49 $ et plus

Votre commande peut prendre jusqu'à 24-48 heures pour traitement. Une fois complété, le délai de livraison varie de 1-5 jours ouvrables selon l'addresse de livraison.

LIVRAISON GRATUITEpour toutes les commandes au-dessus de 49 $ au Canada! Commandes inférieures à 49 $, le frais d'expédition est seulement 7,95 $! *Livraison gratuite n'est pas disponible quand l’adresse d’expédition est un lieu éloigné.Plus >>

43215
I've been planning to buy something like this for some time but they are quite expensive at most places however I can't see where any could be any stronger or easier to install than this one. It came with everything one needs (except a philips screwdriver which I'm sure everyone already has or at least already should have) to install it plus lots of extra spacers and bolts to make installation of just about any ( if not any ) LCD TV to the frame super easy. Couldn't be happier with this wall mount support and glad to finally get rid of the simple plastic stand that came with my TV.
03 déc. 2020
Perfect for retrofitting 4" incandescent pot lights with a LED light that consumes 8 times less power and is many times less expensive than anything I've seen offered elsewhere. I've purchased a number of RayonLED products and they have all performed perfectly.
03 déc. 2020
Just what one needs right now to stay safe and less expensive than I've seen available elsewhere.
03 déc. 2020
Just what one needs right now with a mask required every where one goes and just as good as the other masks I've purchased elsewhere that cost more.
03 déc. 2020
Have bought ink cartridges for my int jet printers from shopper+ for years and suspect Ill be just as happy with this toner for my new Lexmark printer. Came quickly but have not had a chance to try it yet - just getting ready for when more toner is needed. Each cartridge came sealed in it's own plastic bag and box.
06 sept. 2020
Cute animated display. Ordered for use next year as ordered/received too late for use this year, but tried it inside the house and it works as described. Comes with plastic stakes to tie it down but creator obviously lives where the ground doesn't freeze solid as rock and I'll likely use some sand bags instead that can be placed inside it through a zipped opening. Appears to use a long lasting LED Light.
09 jan. 2019
Nice bright surface mounted light and a good deal when purchased on sale with free shipping.
07 jan. 2019
This is the third time I have ordered some of these. They are installed in the soffit of my garage and provide much better lighting than the wall mounted fixtures they replaced and used to shine in my eyes.
05 juil. 2018
I sometimes need to attach and use a larger monitor to my laptop to more accuratly focus network cameras I'm working on and bought this to save the space the larger monitors base took up on my workshop work bench. The HP 22" monitor is much heavier than most 22" monitors (about 18 lbs or 4 lbs more than this mount is rated for) but the stand is well built and handled the weight with no problem. The monitors original stand required 79 sq.in of desk space which this new stand reduced to just 12 sq. in. (about 15% of the space). A bolt through the bench top holds the new mount firmly in place. Nothing weak about this desk mount with everything metal and when not being used the monitor can be lifted and rotated out of the way easily and no chance of the monitor tipping over with the new mount held firmly in place by a large bolt through the top of workbench.
05 juil. 2018
This was my 3rd order for this product. Everything was perfect. The delivery was fast, the installation was easy and quick and the brightness is much better than than the old T12 fluorescents.
11 avr. 2018
Orsered 2 of these to install in my garage soffit and replace the two 100W incandescent wall mounted lights. Less power is now required and no more having to deal with the glare of the wall mounted lights which greatly affected the image obtained from several security video cameras.
11 avr. 2018
My first review on March 10th is below after buying a case of 10 tubes (I wanted to ensure I would be happy with these tubes before buying more). Following that I purchased a case of 30 to finish off my basement workshop and start on the garage workshop. One correction that I need to make to my first review. The measured brightness is actually twice that of 40 watt CW tubes. The first review was written after only re-lamping a single 4 tube fixture and now that over 80% of the fixtures in the garage are done I find that the measured light level is actually twice what is was before. As for power savings, some before made a comparison using using 80 watts as the power required to light two 40W fluorescent tubes, but the ballast also requires some power to operate and the actual power required for two 40W fluorescent tubes with a ballast is about 100W (104W each for several I measured). Each of the 40 LED tubes received worked perfectly and I've already ordered another case of 30 to finish off my 2 workshops and a few other fixtures in the basement. P.S. The person that reported the bulbs didn't work, but others from Costco did, must not have read the instructions or understood what "Ballast Bypass" means as Costco only sells "Ballast Compatible" tubes.
17 mars 2018
Finally - a Canadian source for 4ft T8 LED Ballast Bypass tubes at a reasonable price. Ballast Compatible tubes are available at many local places selling lighting, but I've been looking for Ballast Bypass tubes for over a year and have only found one place that sells one, but they want too much and will not discount by the case. I came across these Shopper+ Ballast Bypass LED tubes a while ago and now that they are on sale for a decent price decided to order and try a box of 10 (which makes them half the price of the one sold locally). After installing 4 in a 2x4ft fixture a light meter showed them as bright as the new 40Watt CW (cool white) fluorescent tubes in the adjacent fixture using 1/3 the power (64W rather than the 204W that 4 Fluorescent tubes and 2 ballasts require). Something to note is that the color temperature of CW Fluorescent tubes is 4100K where as these LED tubes are 5000K. And just as CW Fluorescent tubes appear white compared to WW Fluorescent tubes, these LED tubes appear white compared to CW Fluorescent tubes so you'll want to re-lamp all fixtures in a given area as these 5000K LED tubes will make any with CW Fluorescent tubes appear as if they have WW tubes. (See my photo with the new LED tubes in the closest fixture and CW Fluorescent tubes in the far fixture). Measuring the Lumens from the fixture with the LED tubes and one with CW Fluorescent tubes showed they were about the same, but the whiter light from the LED tubes make them appear much brighter. Now I need to order more tubes for the other fixtures in my basement and garage workshops so I'll no longer have to deal with failing and noisy ballasts or have to wait for the fluorescent tubes in the garage to warm up when turned on in the winter before having enough light to see.
10 mars 2018
I have used this Ink before, it works perfectly and much less expensive than the Ink from Canon.
10 juil. 2017
Exactly what I needed to extend a few nerwork cables a bit further.
10 juil. 2017
Much less expensive than Brother brand name tape and the only differance I can find is the price. Perfect for labeling small plastic parts drawers, old plastic prescription bottles and anything else used to store small hobby related items, or whatever, like spices and other cooking ingediants. Also perfect for labelling and helping keep track of and sorting out all of the cables connected to a computer or TV. Very professional looking labels are easy to make if one of the Brother printers that connect to a computer is used which allow using any font as well as adding graphics.
25 mai 2016
Less expensive than at nearby office supply stores and perfect for labeling small plastic parts drawers, old plastic prescription bottles and anything else used to store small parts or whatever. And one of the best things about these labels is that they can be easily and cleanly removed with nothing left behind when you want to remove or replace one. A free template can be downloaded from Avery which makes it super easy to use Word and print on the labels using either an ink jet or laser printer. Some pretty fancy labels are possible by simply using an appropriate font and including a few graphics.
24 mai 2016
Heck of a lot less expensive than manufactures ink and just as good. Ink cartridges are also made of a clear see through plastic that lets you confirm that they are actually empty when your printer says one is empty and needs to be replaced unlike the black opaque plastic ones from the manufacture and others that hide how much ink each cartridge may still contain. Others also sell compatible ink cartridges and I always check to see if any are less expensive than the ones from 123InkCartridges, but I have never found any to be less expensive.
05 mai 2016

Loading...