kristijan_k reviews

Reviewed

PrimeCables® bandes d'emballage en spirale - 30mm x 1.5m - noir

5/5

Great as expected :-)

15 jan. 2022

Reviewed

Émetteur et récepteur Bluetooth 5.0, adaptateur audio sans fil 2 en 1 - PrimeCables®

5/5

This is my second purchase of this item. I use it primarily for watching TV late night over a headphones. Phenomenal little device, works great!

15 jan. 2022

Reviewed

Adaptateur USB Type C vers USB A 3.0 - PrimeCables®

5/5

Works perfect!

10 déc. 2021

Reviewed

Support mural inclinable à l'angel liber avec verrouillage de sécurité pour TV 32'' à 55''

5/5

Excellent and very simplistic mount. It's very sturdy (I hanged 55" TV). For this price, can't find anything better

10 déc. 2021

Reviewed

Émetteur et récepteur Bluetooth 5.0, adaptateur audio sans fil 2 en 1 - PrimeCables®

5/5

I'm really impressed with this little device. Bought it as it was discounted on black Friday deal and didn't expect too much, however it turned out to be fantastic. I have two use case scenarios: * in the evening when my wife fall asleep :-) switch from TV speakers to my headphones * my corp phone is too fancy (shame on Samsung) to have stereo jack for headset (I'm using old Bose QC25) so with this device I'm able to have very good call quality. Note: microphone on headphone's wire is not supported but this device has it's own microphone (small hole on side) and works perfectly fine. Saved me for spending 400$ for new QC45 or Sony XM4 headphones which both has issues as per ppl reviews). I would like to see support for two BT devices, but re-pairing is OK. In short I love it!! Worth of every penny.

10 déc. 2021

Reviewed

Clips de câble de cercle avec l'ongle en acier, 10mm, 100pcs / paquet - blanc - PrimeCables®

5/5

I used these clips to affix UTP cable in garage. I was pleasantly surprised that this small clips are able to hold 2 UTP cables and 2 power lines. I'm very happy with this purchase

12 jan. 2021

Reviewed

Barrette d'alimentation à 8 prises pour parasurtenseur avec cordon de 3,28 pieds 125V / 15A / 1875W

5/5

I loved it, and feel much better now when TV and other devices are protected from potential surge.

12 jan. 2021

Reviewed

Select Series USB 3.0 A câble d'extension mâle à femelle - Monoprice® - 3pi

5/5

I bought it as an extension cable for USB KVS switch. Works like a charm.

12 jan. 2021

Reviewed

8P8C RJ45 Cat5e coupleur en ligne type keystone jack, noir - Monoprice®

5/5

Works great and I love ability to use already crimped cable with this socket coupler

12 jan. 2021

Reviewed

Combinaison de testeur de câble de réseau et d'outils de sertissage pour RJ-45 RJ-11 - PrimeCables®

5/5

For this price, absolutely no brainer. Usually I don't use tester instrument but since it came in bundle, I absolutely loved ability to be able to check if crimped connectors works properly.

12 jan. 2021

Reviewed

75pi Cat5e 350MHz UTP 24AWG câble réseau Ethernet - blanc - PrimeCables® - 1/paquet

5/5

Fantastic cable, I'm using it for hard-wiring surveillance cameras. It was easy to cut it out to appropriate size and crimp new RJ45 connectors.

12 jan. 2021

Reviewed

Microphone studio vent screen pop masque filtrant shield avec support pivotant - PrimeCables®

5/5

Great pop filter.

06 déc. 2020

Reviewed

Tissu buccal jetable 3PLY 50Pcs certifié CE

5/5

This was first bundle we bought back in time and bought again recently. Other masks we had to try were smelly and caused skin irritation. This mask are great no any of such effects. Definitely recommend them.

06 déc. 2020

Reviewed

Tissu buccal jetable 3PLY 50Pcs certifié CE

5/5

Compared to some other masks we tried this is best masks we found. No smell or skin irritation. Highly recommended.

06 déc. 2020

Reviewed

Bras Support de Suspension Microphone en Forme Ciseaux - PrimeCables®

4/5

Not sturdy and quality as I'd like it to be but hey, look at price and it definitely serves its purpose.

06 déc. 2020

Reviewed

Câble 16AWG séries Premier XLR M/F (plaqué d'or) [microphone & connexion] - 50pi

5/5

Absolutely great premium quality cable.

06 déc. 2020

Reviewed

Cadre ADR de bureau assis-debout à double moteur avec hauteur réglable, électrique - blanc - PrimeCables®

2/5

Sadly I have to decrease my review for this table from 5 stars (Gen1) to 2 stars for Gen2. Reason: Stability. Context: I own Gen1 table which I bought in 2018 and that table is awesome, real sturdy - rock solid as most prime cables products are. After something happened with right leg motor which now trembles when table is descending down, I ended up in situation to buy a "new and improved" Gen2 table. Conditions: carpet flooring, same spot where I kept my Gen 1 table before I replaced it with Gen 2, thus I'm comparing in very same environment and conditions. My table top is 160 x 80 cm. Let's start what I liked about new table: * Noise is great, much more pleasant and noticeably quieter then Gen1 * Stronger motors (not that you need to lift 125kg but it's nice to have that power) * Slightly faster moving up/down * Control panel doesn't have 3 second child lock like Gen1, you can now quickly press memory button twice (first press to wake up) and it's on its way * They moved frame beam towards behind, where there is usually more weight (monitors) - makes sense. It used to be right in the middle on Gen1. With this change there is more space (on Gen1 you could bump with knees into beam when table was in really low position) What I didn't like: * As I gave you a clue right away, my major concern is stability. Gen 2 is not nearly stable as Gen1 is. I don't know if engineering tried and tested it, but IMHO this is on edge of safety concerns when it is extended to higher positions. If you're standing and lean up on table, you can feel how table leans towards which is very unpleasant “flimsy” feeling and it bothers me a lot. As I mentioned, unlike Gen 1 table which is stable like it was made of stone even on highest possible position. * Construction design is very bad. I'd say engineering missed critical thinking. They changed whole principle how you mount table top. Now you have to fix hands and beam on the legs in upright position before even touching table top. Unlike Gen1 where you could put table top on floor, put only hands and beam on it, measure, make holes and then fix hands/beam to legs, rotate whole thing and you’re done. On Gen 2 screws are going through the hands from upper side (!?) to fix legs and you cannot disjoin these two later after table top is fixed. As a consequence major disadvantage of this change is that you cannot remove table top with hands on it once you put all together. You can only remove table top by removing all 24 wood screws from the hands. And now going back to critical thinking point: Imagine that you need to move. Gen2 design will no-doubt damage table top because you'll have to remove every single wood screw to gain access to hands so you can detach legs. When assembled again, you better not use same table top holes because they'll be worn out and loose. Thus, you will need to offset table top a little bit to a new position and make new holes. I guess you can do this once or twice and then you'll likely have to buy a new table top. To compare and reiterate what I mentioned earlier, on Gen1 you can remove table top WITH hands mounted on it by just unscrewing 2 screws on _side_ connecting hands to the beam (not from the top like on Gen2) and you’re done, ready to move with NO damage to table top. * Gen2 control panel looks and feels cheap with retro digital LED but this is really just minor thing, overall it’s OK. Buttons requires certain force to press (you actually feel click) and when table is moving up or down, you can easily loose this grip and interrupt movement before desired position. Luckily you'll likely use memory instead of holding those up/down buttons. To compare, Gen1 had modern touch display, you could lightly hold finger on command and you would never lose a grip. In conclusion, stability is major drawback and I wouldn’t put it under same product code (it’s not same product) and enjoying inherited great 4.5 star reputation from Gen1. What are exact reasons for weaker stability it’s hard to tell, but it might (or might not) be due to some material cuttings (dimensions). Leg width is now 7.8 cm, it used to be 9.2. Leg feet’s are shorter: 63 cm - used to be 70 cm. Foot width is 7 cm - used to be 8 cm and are also shallower. I have to highlight that table is perfectly stable in low/sitting position, thus I feel when extended, narrower telescopic tubes might be too weak for higher positions but I’m not 100% sure. I used my old Gen1 frame for utility desk (printer, shredder, speakers…) right by side. When trying to shake one and the other one on same height - it is a dramatic difference.

15 nov. 2020

Réponse de notre service à la clientèle

Hi kristijan, Thanks for sharing your feedback. If you need any assistance in regard to this desk frame you recently purchased, please do not hesitate to contact us. You may reach out to us by submitting an online inquiry, initiating a chat or by phone at 1-866-979-7463.

Reviewed

Balance de graisse corporelle, Bluetooth d'IMC sans fil, 180kg - LIVINGbasics®

2/5

I used to review this product back in a time with 5 stars (really like overall functions, mobile app, all good) but have to decrease score. I bought this product somewhere during black Friday 2018, now with more than year ago I can only say, it drains batteries like crazy. Initially I thought I had faulty batteries however this is not a case. Funny fact is I really don't use scale that often. In average once every 2 months. When scale is not in use, display is of course - off, and one would expect it's all off. However it looks like scale tries to communicate via bluetooth all the time (this is just my assumption as why it drains batteries). So all in all, after approx one month batteries are dead. Looks like I need new batteries for every time I want to use it :-)

26 jan. 2020

Réponse de notre service à la clientèle

Dear customer ,thanks for your kind reviews .Any quality issue ,could you contact our customer service for help ?You could reach them by calling 1-866-979-7463 or sending online live chat (from Monday to Friday )or sending an email inquiry to us (any time ). We are more than happy to help you here .Best regards

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Réponse de notre service à la clientèle

Reviewed

Réponse de notre service à la clientèle

Passer à United States