Livraison gratuite sur les commandes de 49 $ et plus

Votre commande peut prendre jusqu'à 24-48 heures pour traitement. Une fois complété, le délai de livraison varie de 1-5 jours ouvrables selon l'addresse de livraison.

LIVRAISON GRATUITEpour toutes les commandes au-dessus de 49 $ au Canada! Commandes inférieures à 49 $, le frais d'expédition est seulement 7,95 $! *Livraison gratuite n'est pas disponible quand l’adresse d’expédition est un lieu éloigné.Plus >>

Livraison gratuite sur les commandes de 49 $ et plus

Votre commande peut prendre jusqu'à 24-48 heures pour traitement. Une fois complété, le délai de livraison varie de 1-5 jours ouvrables selon l'addresse de livraison.

LIVRAISON GRATUITEpour toutes les commandes au-dessus de 49 $ au Canada! Commandes inférieures à 49 $, le frais d'expédition est seulement 7,95 $! *Livraison gratuite n'est pas disponible quand l’adresse d’expédition est un lieu éloigné.Plus >>

43215
Didn't work, no foam, just lights, and an electronic motor sound when the sensor is activated. Requested a replacement, we'll see then, and update as necessary.
16 déc. 2020
Review-reply-icon

Réponse de notre service à la clientèle

Hello Scott, thank you for your feedback. We are sorry to hear the soap dispenser cannot work well. If you have any questions, please feel free to contact us by email (support@123ink.ca), by chat or call us: 1-866-979-7463

Arrived heavily cracked with lots of little shards of shattered glass, which I didn't notice right away until I got a glass splinter while taking it out of the box. Gonna throw this away ASAP as there are breather holes in the plastic causing the glass shards to fall out. Requested a replacement, we'll see how it goes. Shame, was looking forward to it. Will update if possible when issue resolved.
16 déc. 2020
Review-reply-icon

Réponse de notre service à la clientèle

Dear Scott, Your feedback is important to us. We appreciate you for taking the time to let us know your comment about the "1800W Portable Digital Induction Cooker Countertop Burner, Push Button Controller - LIVINGbasics". We're so sorry that we didn't meet your expectations for this product at this time. If you have any other questions or concerns about our products, please don't hesitate to call us at 1-866-979-7463, or contact our customer service by live chat or send us an email to support@123ink.ca as soon as possible for us to assist you further. Thank you!

Got this to use with a laminator the wife got from Amazon. Great price on sale for the size/thickness.
16 déc. 2020
Not bad for a complete product. I set this up by myself, though it recommends two people. Everything required is included, but there are some things to note which will cause confusion and some wasted time. The table top and the instructions lose points. It's great the table top folds for easier shipping and handling, and there are preset inserts/holes for the bolts and screws for easier installation. The screw holes are really difficult to spot. The alignments for the bolt and screw inserts/holes are accurate, but it is obvious the table top is used for other desk frames, and you have to figure out which holes to use (use the most outside bolt inserts for this product). There is ONLY ONE way to correctly set up the table. Again for the bolts, the silver bolts included in the frame (marked as "A" group) to use in the table top inserts don't work, as they are too short and won't thread with the silicon washer in place. They will work without the washers though. Oddly enough, the table top came with the correct length bolts, and are black, use these. The instructions are about 80% workable, they miss out on some details, there are some mislabels, directions on how to adjust the length of the frame (4 screws on each side near center frame hold the extender bar in place), and the placement of the control unit (different spot than noted in instructions, and it disappears in later steps too), the shape and direction the washers should be. Also, according to the final design, the control box unit and the memory controller interface are to be placed on the same side (front)... which could cause your knee to hit the control box if sitting. I drilled in new holes for the memory controller interface on the opposite side to use as the front (also because the table top became damaged in the corner somehow. See photos for details. Overall, a decent product, I will probably replace the table top, depending on performance. I have another, much higher quality dual-motor standing desk (150kg max lift load) that I paid roughly $500 CAD total for the frame (steal of a deal), and installed a solid 2 inch wood table top to which I can compare.
16 déc. 2020

Loading...