Livraison gratuite sur les commandes de 49 $ et plus

Votre commande peut prendre jusqu'à 24-48 heures pour traitement. Une fois complété, le délai de livraison varie de 1-5 jours ouvrables selon l'addresse de livraison.

LIVRAISON GRATUITEpour toutes les commandes au-dessus de 49 $ au Canada! Commandes inférieures à 49 $, le frais d'expédition est seulement 7,95 $! *Livraison gratuite n'est pas disponible quand l’adresse d’expédition est un lieu éloigné.Plus >>

Livraison gratuite sur les commandes de 49 $ et plus

Votre commande peut prendre jusqu'à 24-48 heures pour traitement. Une fois complété, le délai de livraison varie de 1-5 jours ouvrables selon l'addresse de livraison.

LIVRAISON GRATUITEpour toutes les commandes au-dessus de 49 $ au Canada! Commandes inférieures à 49 $, le frais d'expédition est seulement 7,95 $! *Livraison gratuite n'est pas disponible quand l’adresse d’expédition est un lieu éloigné.Plus >>

43215
I have a full shopper plus set up over here hahahaha. Came as described! It's too tall for me at sitting height (I'm 5'3 and I knew this would be a trade off), so I use taller chair with foot rung. Desks for shorter people are always more expensive because the legs needs a wider range of height adjustment. I mostly use it in stand desk height so it's fine. Appreciating the easy installation (did it by myself!) and that extra drawer is nice. I was also able to use a magnetic cord organizer on the front side, since the legs are all metal. Surface seems pretty durable and the overall construction is heavy, so I hope it lasts a long time! bonus usb ports in the front work too. Desk remembers the right height with the settings.
14 août 2024
works as described! Also appreciated the no plastic packaging.
14 août 2024
i am about 5'3 and I don't think this arm is tall enough to raise my 24" monitor high enough so that my eyes are at monitor level in portrait mode. I end up spinning the monitor so it's vertical/portrait. My monitor's vesa back was quite recessed, so I couldn't "slide" the mount to arm piece because the monitor's plastic would catch on the metal part. Instead I had to install the metal vesa mount to the arm piece first, then install the mount to my monitor's back. The slot in the mount to keep your allen keys is smart! The hardest part of installation was flipping the metal attachments on the arms to be pointing "upwards" because the edges are quick narrow and hard to grip well enough to rotate them. if this were to ever be redesigned, I think the main pole should be taller by at least a few inches, so that the smaller sized screens can sit horizontally at a more ergonomic eye height for stand or sit desk mode.
14 août 2024
i used this to connect two halves of a split keyboard together. works and is the length described.
14 août 2024
for whatever reason i thought this was going to be the size of a small glue gun but it is actually the size of a large hair dryer. i used it to heat some shrink tube for cable repair. works!
14 août 2024
came very compressed, but otherwise as described!
11 août 2024
I left this filled with water overnight while horizontal and it didn't leak. Have also tried shaking it upside down and didn't see any leaks. Caveat is that I haven't tried to microwave or freeze it yet, which could maybe lead to seal deformation later, but time will tell. I wonder why they didn't just print the "eyes" of the bird on the bottle itself? The included "sock" has the eyes, but because the threads weren't "finished" neatly in the back, you can kind of see them, through the white fibres. Like a bird with dripping makeup on. Kind of funnier because of this. Inside out, the sock looks a bit clown-ish. I wouldn't feel confident putting this sock in the machine wash because I'd guess the eye/beak fibres would all fall out.
11 août 2024
exactly as described! Easy to clean, no sharp bits on the surfaces.
11 août 2024
Haven't used them yet, but they seem to be fine. Will be using them as laundry mesh bags, instead of the usual plastic ones.
11 août 2024
The metal peg board is actually quite heavy, so it feels like it will last a while. The clamp part (other than the knob) is also metal. The rectangular and cup container and the "phone" frame are plastic. The other parts are also metal-based.
11 août 2024
pretty happy with the shredder, though I'm an intermittent user only. Have only done paper/labels/bubblewrap envelopes so far since the other reviews mentioned it doens't do plastic well. I mainly use it to shred addresses from mail/receipts/mailers. I find this shredder does a pretty good job of "sucking" in small pieces of paper (like an address cut out of an envelope), as long as you push it in far enough. Cross cut is good enough for my purposes. It's "bigger" in physical dimension than I expected (I didn't pay attention to the size specs) so if you're short on space, double check!
27 juil. 2024
It has some rough edges, especially where the holes have been cut out. I gave myself a splinter! The "stopper" at the bottom (so your papers/laptop doesn't slide down) is hidden in the side drawer. Mine had a big "nick" in the edge that makes it stabby. When closed, the two surfaces (the part that raises to an angle vs. the part that is stationery with the cup groove) are not level (off by 5mm at the centre), which could be a deal breaker if someone really wanted a flat surface. Rising the legs works and seems pretty stable when basic force is applied downwards. The fans work too. I like that the fan has a built in coil for the USB-A connection, and should be long enough to reach a laptop that is sitting on the table surface.
27 juil. 2024
The finish is OK...most of the edges are sanded down but there are brittle/broken pieces on "inside" of some edges. Some of the curved tops have uneven rounding, if that matters to anyone. One of the pieces also had a bunch of strange gray splotches over it that didn't look like bamboo grain. After assembling it wasn't *super* level, but it still works the way I wanted it to and I don't plan to move it around, so still think it's pretty good value. As others have mentioned, there are no instructions, so I looked at the product photos online to assemble it. What's not obvious is that you need to install the bottom-right horizontal shelf with the correct piece of bamboo (i.e., the piece with the 2 holes drilled into the underside of the horizontal surface). Those holes for you to place the two provided blunt slidey-metal knobs, that let you slide the shelf along the groove of the bottom-left shelf's topside horizontal surface.
27 juil. 2024
pretty easy to assemble and seems sturdy. Great value and in a colourway that I don't see often!
27 juil. 2024
I needed this to plug into a laptop far away, but still be able to use audio and mic. Seems to be working so far and haven't heard any complaint from my coworker about sound quality!
19 jan. 2024
Exactly as described! Didn't realize the middle 3 pots (white and gray pots) were a bit larger than the black ones, but I can see that's true to the picture after looking closely. Nice if you can't be bothered to make your own macrame hahahaha
19 jan. 2024
Was a bit of a beast to assemble, so my advice is to make sure your criss-crossing is consistent on both sides. Otherwise is sturdy and compact!
19 jan. 2024

Loading...