15ft Slim Series High Speed HDMI® Cable w/ RedMere® Technology - PrimeCables®

Attention!!! HDMI® Cables with RedMere® are directional.

One end labeled TV on the connector must be connected to the sink/display (e.g., HDTV) while the other end to the source device (e.g., blu-ray player).

Hooking them up backwards will not damage anything, they just won't transmit a signal. Also note that these cables are fully compatible with switches, splitters, matrix devices, etc. They can be used in any application in which a normal HDMI® cable can be used and many applications where HDMI® extenders would otherwise be required!

A High Speed HDMI® Cable with RedMere® from PrimeCables is the best way to transmit your High Speed HDMI® signals over the longest distances, while using the thinnest cables possible!

RedMere® technology is a breakthrough in the functionality and efficiency of HDMI® cables. High Speed HDMI® Cables with RedMere® can reliably distribute High Speed signals to much greater distances, up to 65 feet (20 meters) at the full 10.2 Gbps data throughput, as opposed to the 25 foot distance for HDMI® cables without RedMere® technology. This can be done with thinner and lighter cables, which are easier to handle and route through your home theater system and which put less stress on your equipment's HDMI® ports.

This cable is CL2 rated, which means that its outer jacket has been designed to burn more slowly, thereby making it safe for use inside or through the walls of residential classed buildings. The CL2 rating ensures that your cable installation complies with fire safety codes and insurance requirements.

TIP: It is a good idea to test cables and connections before installing them inside a wall. If there are any issues or problems, we can help you resolve them before you spend the time, effort, and expense of installing them inside the walls.