HDMI Amplifier Switcher 3X1 (1.4V), 4K*2K with Built-in Equalizer & Remote - PrimeCables®

HDMI Amplifier Switcher 3X1 (1.4V)

4K x 2K with Built-in Equalizer and Remote

This is a high performance HDMI Amplifier Switcher. This kind of HDMI Amplifier Switcher not only has the key-press-switching function, but also has the IR remote control and intelligent function. That is to say, as soon as the power supply of the source equipment is switched, this switcher will respond automatically.

In addition, it is equipped with standard IR extender receiver: safe and convenient.

This kind of HDMI Amplifier Switcher routes high definition video (in multiple resolutions up to 4k*2k) and digital audio from any one of the several sources to display units. All inputs accommodate the connections of the high definition video sources simultaneously, compatible well for HD-DVD,SKY-STB, PS3, Xbox360 etc. The output sends the high definition audio/video signals to a high definition display.

Intelligent function

1. Once the source device is turned on or plugged in (should stay power-on mode), the switcher will automatically select this source. And once two or above input ports be plugged in, the switcher is defaulting on the last source. It can be manually on the press of the “Select” button to select one input source from two/three (but only one can be available). And can also use the IR remote control for optional.
2. Once the source device is turned off or plugged out, the switcher will automatically select the next power-on source depending on the sequence automatically (input 3 > input 2 > input 1)

Note

• When the source devices are on the stand-by mode, its power supply should be turned off, otherwise this switcher can not meet intelligent function.
• When plugged in or out, this switcher is completely intelligent.

Features

This HDMI Amplifier Switcher has many features that enable it to perform in a superior manner. Among those features you will find:

Connection and operation
Before installation, please make sure all devices you wish to connect have been turned off.

1. Connect the HDMI input source into the HDMI switcher (Input cables are optional).
   *Please refer to connection diagram section.
   
2. Turn on the power.

Note
1) Please make sure to cut off the power before insert IR Extender into the Converter.
2) Please make sure to insert the plug of IR Extender into the Converter completely.
Attention: Insert / Extract cable gently.