Blackbird 4x1 HDMI 1.4 Switch HDCP 1.4 with Toslink and Analog Audio Extractor - Monoprice®

HDMI 4 Port Switcher with Audio Output

Perfect to expand the input capabilities of an A/V receiver that doesn't support HDMI

This 4-way HDMI switch features S/PDIF (Toslink®) Digital Optical Audio, Digital Coaxial Audio, and analog 3.5mm stereo audio output ports, allowing you to connect to the audio inputs of any AV receiver or amplifier. A built-in DAC allows simultaneous audio for HDMI as well as the three audio only outputs.

The switch supports the full High Speed HDMI resolution (1080p@60Hz), supports all HDMI 3D modes, Deep Color up to 36-bit total, and high definition multichannel audio, including Dolby TrueHD™ and DTS-HD Master Audio™. One HDMI input is on the front panel of the switch, making it easy to connect the HDMI output from mobile devices, such as your Android™ phone.

Features

• Full HDCP support
• Dolby TrueHD audio
• FCC, CE, and RoHS compliant
• Audio sampling rate of 44.1 to 192 kHz
• Supports uncompressed LPCM audio
• Support for 1080p and 3D video output
• Supports 12-bit per channel (36-bit total) Deep Color
• Supports 225 MHz/2.25 Gbps per channel (6.75 Gbps total) bandwidth
• Supports compressed DTS® Digital, Dolby® Digital, DTS-HD Master Audio, and
• Integrated audio converter for simultaneous digital and analog audio output on all audio output channels
• Selectable 2-channel (stereo) and 5.1-channel audio output for digital channels (5.1-channel output requires 5.1-channel input and output)

Support Files

• User's Manual (Mar 28, 2013)

Note: PrimeCables strongly recommends using 22AWG, 24AWG, or active HDMI cables not exceeding 10ft to achieve the best results from the amplifier and to ensure minimum signal loss over longer distances.

*The S/PDIF Optical (Toslink) and Digital Coax audio output formats are based on the HDMI audio output. If any of the sync devices (e.g., HDTV, Projector, etc.) connected to the output can only support stereo audio, then the S/PDIF Optical (Toslink) and Digital Coaxial outputs will be limited to PCM stereo audio.

Note: Primecables strongly recommends using 22AWG, 24AWG, or active HDMI cables not exceeding 10ft to achieve the best results from the amplifier and to ensure minimum signal loss over longer distances.