Network Cable Tester & Crimping Tools Combo for RJ-45 RJ-11 - PrimeCables®

Network Cable Tester & Crimping Tools Combo for RJ-45 RJ-11

Tester and crimpping tools enables your work more easily and efficiently

Network Cable Tester with RJ-45 Crimping Tool

Do-it-yourself networking!

You can save a lot of money when you crimp your own cables! Make and test a wide variety of network cables with this kit. This kit comes with RJ-45 Crimping Tool and 9V battery-operated network RJ-45 cable Continuity Tester. The tester also tests BNC cables. Get yours today!

(Battery Not Included)

NOTE:

As pictured above, the Cable Crimper and the Cable Tester are packaged in separate retail hanging blister packages.  Both are shipped together in a plain white box.

2 in 1 RJ45/ RJ11 Crimping Tool with Ratchet 8/6 Pin

What we are going to recommend you today is this  6P/8P Modular Crimping Tool Crimping Pliers (200mm). It can help to cut or peel flat telephone wire or round twisted-pair, such as UTP and STP. Using high-quality low carbon steel for manufacturing and dying the surface into black, this pair of pliers is rust-proof for long-term use. What is more, with PP grip handle, it is quite comfortable to grip. Additionally, the spring device makes it labor-saving and precise in crimping. You might as well take this item into consideration if you want to buy a new one!

Features

• New and in a good condition
• Superb low carbon steel material along with refined workmanship
• Good processing of cutter edge, more durable and sharper to use
• Anti-skid PP handle makes it comfortable and easy to operate
• Can be used to cut or peel round twisted-pair and flat telephone wires
• Spring setting on the pliers makes it much labor-saving
• With a lock function, this pair of pliers is convenient to use
• Multi-function network and telephone tool crimps, cuts and strips for easy on-the-job tool application
• The steel frame gives long term durability and dependability
• Provides easier and faster operation
• HM-376E for RJ45 RJ11 modular connector with steel frame

RJ45 RJ11 RJ12 BNC Network Cable Tester

Operation Instructions

• Connect one plug of cable to Main Unit, and the other plug to Remote Unit
• Choose "OFF", "ON" or "S" to test the cable
  • "OFF" means Power of
  • "ON" means normal speed
  • "S" means Slow Speed
• To read the test results from the LED indications

Multifunctional Network Cable Tester

(1) Functions
1. Can test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and G, meanwhile it can judge wrong connection, short circuit and open circuit.
2. NS-4688 tests BNC, RJH and RJ45; NS-468 tests RJ 11 and RJ45; NS-468N tests RJ45 and BNC, ST-248 tests RJ45 and BNC. 

(2) Test of double-twisted cables; Switch on the power. 

Sequentially from 1 to G
Main tester: 1-2-3-4-5-6-7-8-G
Remote tester: 1-4-3-2-5-6-7-8-G

Following are abnormal connections

1. If one cable, for example cable NO. 3 is open circuited, the two NO. 3 lights of the main tester and remote tester will not turn on. 
2. If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on. 
3. If two ends of a cable is disordered, for example NO. 2 and NO. 4, then displays on:
   Main tester: 1-2-3-4-5-6-7-8-G
   Remote tester: 1-4-3-2-5-6-7-8-G
4. If two cables are short-circuited, neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding lights is on. 
5. If test patch panels or wall plate outlets, two cables which can match each other (eg110 P4 and RJ45) will be connected to the tester. 
6. If test cables of the same axes, BNC turns on when the cable works.