A) You need to force the IP static addr..192.168.2.94 that is for with Bell hub connect S2000 (home hub connect) BELL model S2000… I don’t KNOW for you guys !!!!! B) Then erase all the old model printers install on your computer and run with the permission of ADMIN FOR WIN 10 in the list of extracted files (or your cd-rom in the BOX purchase), right-click the file Network Printer Wizard Setup 2017 with Window 8.exe file and click Run as Administrator. ME I FOUND IN THE WEB THE EXACT SAME MODEL AS 123INKCARTRIDGES.COM WITH: www. STARTECH.com …….model PM1115u2 go to… “ product support “ C) To create a print server port, complete the following: FOR WINDOWS 10 edition = HOME/FAMILY….. VERSION 21H2 1. Press the Windows key. 2. Click Settings > Devices > Bluetooth > Printers > Mouse > Add a printer > The printer that I want isn't listed. 3. Select the Add a local printer or network printer with manual settings check box, and click Next. 4. Select Create a new port. 5. Change the type of port to Standard TCP/IP Port, and click Next. 6. In the Hostname or IP address field, enter the IP address of the print server, and click Next. 7. Click Custom > Settings > LPR. 8. Under LPR Settings, enter a Queue Name. The queue name should be lp1. 9. Click OK > Next. 10. Select a driver from the list, and click Next. 11. Click Next until you are asked if you want to print a test page. To confirm that the printer was successfully added, send a test page to your printer. HOPE IT WILL KEEP THE CONFIGURATION WHEN YOU SHUT DOWN (COMPUTER) FOR THE NEXT DAYS YOU NEED TO DO THIS ON EVERY COMPUTER YOU HAVE IN YOUR POSSESION