Ah Ha! My HDMI source was a video resolution set higher than the TV capability. When I dumbed down the source to 720p, the cord worked marvelously. A similar warning is present on the website here, but without a solution. So, if the source is say a Blu Ray with HDMI output only, and its screen resolution is set on "Auto" resolution, it cannot "see" the TV capability through the cable converter. You have to "force" the proper resulution by resetting the source output via its settings screen menu. Hope this helps somebady - it took me 5 hours to figure this out. And remember ... you'll need a second TV with a regular HDMI input to act as a monitor while you set up the Blu Ray. A Catch 22. Ha Ha. I'd give a 5 but you didn't explain this fix. Cheers!

Works goid

This product is good and worked well with my rear projection tv, however the left and right channels were inversed, and i had to inverse the cable. Wished the usb part of the cable would be a little bit longer (as the length of the hdmi) so i could power it with my laptop instead of the box.

très versatile

Bonne présentation et bon produit qualité prix

Pas parfait mais très bien pour le prix