I have just refilled the color ink cartridge and it was that easy to refill. Print output came out beautiful. One question though, when the refill kit runs out of ink, is that refillable too? And how? Overall, very satisfied.

Setup and instructions were simple enough to follow, perhaps messy the first time, it doesn't reset the ink low warning on printer but colors were good and it worked, however from my experience with the black refill kit, it only works 1 refill per cartridge. For example, get new cartridge, refill with kit once, throw away that cartridge and buy another cartridge, refill it with the kit once more, throw away that cartridge and buy a new cartridge... Might get 8 refills but only with 8 printer cartridges and only if you get through 16 ink depletions.

Réponse de notre service à la clientèle

Hi Justin, Thanks for sharing your feedback on Canon CL211 Color Ink Cartridge Refill Kit - G&G™. If you have any other questions, you may reach out to us by submitting an online inquiry, initiating a chat or by phone at 1-866-979-7463.

Service de livraison très rapide. Difficulté après le remplissage de la cartouche , pour l’impressionde mes documents. Une fois, le problème réglé, l’impressionest est numero 1. Je trouve désolant que nous ne pouvons avoir la quantité d’encre restante dans la cartouche d’encre.

Doesnt fill the cartridge. Ink Explodes. Yellow has air bubbles so it wont fill.

Réponse de notre service à la clientèle

Dear Ashley, Thank you for the reviews. We have put the refill instruction on the website. You could please follow the instruction to refill the inks.

I had read the warnings in other reviews but thought I could, with some patience, get it to work. Absolute nightmare. This was a tri-colour cartridge, requiring three holes to be drilled, and each colour suctioned in turn. First problem: the rubber tips on each of the ink needles were on so tightly that in pulling them off, it lifted the entire needle apparatus out of the ink chamber and splatted ink everywhere. There was nothing to stop one colour's ink from leaking into the next at that point. I thought I could live with a little cross-contamination, so kept going. One of the rubber tips tore apart rather than come off. The whole handling of those three sharp needles in close quarters is dangerous and good luck not skewering yourself. I had managed the black ink okay, even though it took several tries. The colour - no such luck. The first draw actually sucked a bunch of ink into the syringe, which isn't supposed to happen. (Yes I followed all the instructions, and released the pressure first.) Then the ink started foaming as air was being pulled into the chamber from the syringe. (Yes, I followed the instructions and carefully removed all the paper away from the hole edges on the cartridge so it could form a proper seal.) This meant there was no negative pressure to pull the syringe down, and as I found out, "helping" it by pushing lightly just squirted the ink back up into the area around the needles where it oozed into the other colour chambers. I then bravely tried just injecting the ink into the cartridge holes with my own syringe. Messy, ineffective. So back to trying to the instructed way. After about an hour I managed to get enough blue and magenta to print with, but yellow was just a big fat no. No point in partial colour. I tried again the next day, nope. It just foamed and foamed and foamed yellow everywhere but into the cartridge. So I can't recommend this product. The black works okay, not on the first try (not if you want to print more than a half-page, anyhow), but the tri-colour ink set-up is dreadful.

Réponse de notre service à la clientèle

Dear Customer, Thank you very much for your reviews. We are sincerely sorry for the inconvenience. Please contact our customer service to get some compensation.

This is such a good idea. It cuts down on waste, because the cartridge is re-usable. It is also a lot more cost-effective than single use cartridges, even if the cartridge is re-filled.