Love this arm, fits my 31.5 curved monitors Perfectly. The adjustment for the spring can take quite a bit of screwing, but once you have it dialed in, they are solid. No dropping. The range if motion and specifically the adjustment to the side to side rotation is Fantastic. I canock the arm so it first pivot into the wall now. Really happy with these monitor arms, and the cable managment under the upper arms is easy to remove when needed. Will buy more of these when I get more monitors! Easy to assemble and adjust and great price!

Good sturdy mount. Holds my ~28" monitors (~12lbs) easily and adjusts easily. As others have said the tilt is a little touchy, but I was able to get it tight enough to hold while still being able to tilt without a tool. I imagine if you have more weight you might have to lock it right down tight. The cable management is good. I tried clamp mount before grommet mount. Both work great. My only complaint about the mounting is there are different plates that you have to screw onto the bottom of the base for grommet vs clamp. There is a peel-and-stick foam desktop protector that covers the screws. If you decide to switch from clamp to grommet (or vice versa) you have to peel off the foam which rips very easily. The product descriptions are confusing so a few things that might help people: The base is cast which is nice. It's not cheap metal with a plastic cover like some cheaper mounts. The bottom joint can rotate 360deg or you can turn in a set screw to limit it to the front 180deg only (see pic). The mid joint rotates 360deg. The neck joint only rotates 180deg. There is a cast stop/raceway in the pieces (see pic). I don't even think you could get a true 90deg from the arm before you hit the stop. This is why I only gave 4 stars. I cut/ground off the stop to allow more rotation which so far seems to have worked great. This allows me to push my monitor back further against the wall, tucking the arm into the curvature of the monitor's rear.

Pour les moniteurs plus grand et plus lourd et l'option de mettre un portable avec plateau! Il offre une capacité de résistance Plus importante avec une extension plus longue . Et surtout son ajustement a inertie négative offre Une variation de hauteur optimale en demeurant dans la position désiré.

Strong and sturdy metal arm. Got some good weight to it. Holds my large curved monitor without any issues. Set up is easy. Make sure your desk is thick enough as the clamp needs a string foundation to support everything

Easy to install and works very well for the intended use. Cleared a lot of space on my desk so it's great!

Can easily handle the weight of my 43" XG43VQ ultra wide monitor. My monitor weighs 8.3KG = 18.3lbs without its stand and remains in place without any sag. You do need to tighten that preload spring for quite a while before it begins to hold that weight. They probably set it at its minimum setting from factory to improve the shelf life. The arm was easy to put together and barely needed the instruction manual. I primarily bought this stand so that i could push my monitor further away from my face since my desk is only 2.5ft deep. If you move your desk a little bit further from the wall then you can make the monitor sit further back to provide eye relief.